Garage door manufacturer
Product successfully added to your shopping cart
Rail for tilting or sectional garage door, J-shaped
Material: Galvanized SteelThickness: 20/10Sold individuallyPre-drilling varies depending on the modelIntended for Ø45mm castor
Available lengths:
- 1900 mm (random drilling)
- 2000 mm
- 2500 mm (random drilling)
- 3000 mm (random drilling)
Rails also available in lengths of 1.2 to 1.8m with transport by Colissimo
As this product is bulky, we will entrust the delivery of your order to DB Schenker, a few days after receiving your payment.
Order today and receive your parcel between Tuesday 5 May and Monday 11 May.
Delivery subject to access for heavy vehicles.
We calculate your shipping costs based on the weight of your goods and your delivery address (any customs clearance costs are included).
From € 29.90 tax incl.
Another country ?
If no transport solution is offered in the shipping cost estimate in your cart, contact-us to get a quotation.
At our Factory in Delle (Technoparc Franco-Suisse - F90100 DELLE) Monday to Friday from 8:30 a.m. to 4:45 p.m. (except public holidays and vacations).
Of course, it's free!
| 5 |
|
8 |
|---|---|---|
| 4 |
|
1 |
| 3 |
|
0 |
| 2 |
|
0 |
| 1 |
|
0 |
rail de guidage
Emballage protecteur de bonne qualité. Livraison rapide. Matériel conforme aux attentes et costaud, bien dimensionné
rail
bien mais légère flèche
Rail de guidage.
Excellent produit avec un délai de livraison ultra rapide. D'autres part c'est la première fois de mon existence qu'un patron répond aux mails aussi rapidemment en proposant une solution adaptée à ma demande. Il S'agit d'une société très professionnelle.
rail de guisage
matériel arrivé dans les temps et bien emballé
Porte sectionnelle tubauto
Bonne Épaisseur de rail. C'est du solide. Bon colissage avec protection mousse Livraison rapide malgré colis grande longueur Si on veut être critique les bords pourraient être ébavuré
Roller Spindles for garage door - 6,60 €
Roller for up-and-over and sectional garage doors
Roller diameter : 45mm
Spindle diameter: 10 or 11mm
Ball bearing
3 models:
Spindles Ø 10mm - Spindles lenght (without roller) 85mm
Spindles Ø 11mm - Spindles lenght (without roller) 95mm
Spindles Ø 11mm - Spindles lenght (without roller) 150mm
The standard diameter of the roller spindles is 11 mm. For special requests, you can also opt for the 10 mm diameter version.
Panhead screws and nuts M8 - 3,90 €
Panhead screws and nuts M8 M8 nuts - Lot of : 10/20/50/100 Stove head M8 screw (with square under head) - Length 19mm - Lot of : 10/20/50/100 Useful to realize all your fixings
Straight rail for garage door (Length 1.2 to 1.8m) - 29,70 €
J-shaped rail for sectional garage doors or other uses.
Material: Galvanized Steel Thickness: 20/10 Sold individually Pre-drilling depending on the model Intended for Ø45mm castor
Available lengths longueurs : - 1200 mm (promo - random drilling) - 1640 mm - 1785 mm
Rails also available in lengths up to 2500mm >
Sliding rail/spacer bar connections (pair) - 12,00 €
These parts allow the rear attachment of the rails to the spacer bar.
Their design allows them to slide easily to adjust their position on the spreader bar.
Dimension: 54x120mm
In galvanized steel
Sold in packs of 2 (1 left + 1 right)
6 screws + 6 M8 nuts supplied
Rail connection (for roller guide rail) (pair) - 24,00 €
These galvanized steel end caps attach to the ends of straight rails to transform them into a top curve for guiding the casters of your sectional door.
Length 500mm
The pair
+ 4 bolts M8x20
Nesting, drilling and bolting
Compatible with standard rails on the market (2 inches or 25x53mm)
Rails not supplied
English
Français
Deutsch
Porte basculante avec portillon
Super Merci